PA6 830LS-30G
0
- Properties:30% glass fiber reinforced with added heat stabilizer
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.36 g/cm3 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R计称 | 119 |
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| tensile strength | 159 MPa | ||
| tensile elongation | 断裂 | 3.0 % | |
| Flexural modulus | 8270 MPa | ||
| bending strength | 193 MPa | ||
| Impact strength of cantilever beam gap | 107 J/m | ||
| 1.8MPa，未退火 | 210 ℃ | ||
| Shrinkage rate | 流动 | 0.3 % | |
| Water absorption rate | 24小时 | 1.1 % | |
| melting temperature | 216 ℃ | ||
| tensile elongation | 屈服 | 2.0 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 0.45MPa，未退火 | 216 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top