PA612 Zytel® 159L DUPONT USA

190

Properties:
Mineral reinforcement
Thermal stability
Usages:
Engineering accessories
Automotive Applications
Engine parts
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result	Unit
density		ASTM D792/ISO 1183	1060

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Tensile modulus	1mm/min	ISO 527-1/2	DAM｜2400	Mpa
Tensile modulus	Tensile modulus	1mm/min	ISO 527-1/2	50%RH｜1550	Mpa
Impact strength of cantilever beam gap		ASTM D256/ISO 179	5	kg·cm/cm(J/M)ft·lb/in
tensile strength		ASTM D412/ISO 527	2400	kg/cm²(MPa)[Lb/in²]
elongation		ASTM D412/ISO 527	4.5	%
Bending modulus		ASTM D790/ISO 178	2150	kg/cm²(MPa)[Lb/in²]
Charpy notch impact strength	23℃	ISO 179/1eA	DAM｜4.2	kJ/m²
Charpy notch impact strength	Charpy notch impact strength	23℃	ISO 179/1eA	50%RH｜8	kJ/m²
Impact strength of cantilever beam gap	23℃	ISO 180/1A	DAM｜4	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23℃	ISO 180/1A	50%RH｜6	kJ/m²
Impact strength of simply supported beam without notch	-30℃	ISO 179/1eU	DAM｜NB	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30℃	ISO 179/1eU	50%RH｜NB	kJ/m²
Yield strain	50mm/min	ISO 527-1/2	DAM｜4.3	%
Yield strain	Yield strain	50mm/min	ISO 527-1/2	50%RH｜19	%
Fracture yield strain	50mm/min	ISO 527-1/2	DAM｜35	%
Fracture yield strain	Fracture yield strain	50mm/min	ISO 527-1/2	50%RH｜＞50	%
Impact strength of cantilever beam gap	-30℃	ISO 180/1A	DAM｜4.9	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30℃	ISO 180/1A	50%RH｜4.3	kJ/m²
Charpy notch impact strength	-30℃	ISO 179/1eA	DAM｜4.2	kJ/m²
Charpy notch impact strength	Charpy notch impact strength	-30℃	ISO 179/1eA	50%RH｜4	kJ/m²
Impact strength of simply supported beam without notch	23℃	ISO 179/1eU	DAM｜NB	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23℃	ISO 179/1eU	50%RH｜NB	kJ/m²
Yield stress		ISO 527-1/2	DAM｜62	Mpa
Yield stress	Yield stress		ISO 527-1/2	50%RH｜52	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Hot deformation temperature		ASTM D648/ISO 75	62	℃（℉）
Melt Temperature	10℃/min	ISO 3146C	DAM｜218	°C
Melt Temperature	Melt Temperature	10℃/min	ISO 3146C	50%RH｜-	°C
vicat softening point	20N	ISO 306	DAM｜181	°C
vicat softening point	vicat softening point	20N	ISO 306	50%RH｜-	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric temperature	0.45MPa	ISO 75-1/2	135	°C
	Dielectric temperature	1.80MPa	ISO 75-1/2	DAM｜62	°C
	Dielectric temperature	Dielectric temperature	1.80MPa	ISO 75-1/2	50%RH｜-	°C
Linear coefficient of thermal expansion transverse		ASTM E-831	DAM｜1.2	10-4/℃
Linear coefficient of thermal expansion transverse	Linear coefficient of thermal expansion transverse		ASTM E-831	50%RH｜-	10-4/℃
Linear thermal expansion coefficient flow		ASTM D-831	DAM｜1.2	10-4/℃
Linear thermal expansion coefficient flow	Linear thermal expansion coefficient flow		ASTM D-831	50%RH｜-	10-4/℃

Processing conditions	Test Condition	Test Method	Test Result	Unit
Mold temperature			50-90	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top