DAP Cosmic DAP D44/6160 Cosmic Plastics, Inc.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap			19to27	J/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength			31.0to41.4	MPa
bending strength			68.9to82.7	MPa
compressive strength			138to193	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD：-40to100°C		4.5E-05	cm/cm/°C
Hot deformation temperature	HDT		260	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density			1.74	g/cm³
Shrinkage rate			2.3
Shrinkage rate	Shrinkage rate	MD		0.30to0.70	%
dimensional stability			<0.080	%
Water absorption rate	Equilibrium,50°C		0.40	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity	--4		6E+09	ohms
Volume resistivity	--3		>1.0E+16	ohms·cm
Volume resistivity	Volume resistivity	--4		6E+09	ohms·cm
Dielectric strength	Dry		15	kV/mm
Dielectric strength	Dielectric strength	Wet		14	kV/mm
Dielectric constant	1kHz6		4.50
	Dielectric constant	1kHz7		4.70
	Dielectric constant	Dielectric constant	1MHz6		4.20
Surface resistivity	--3		>1.0E+16	ohms
Dielectric constant	1MHz7		4.40
Dissipation factor	1kHz6		9E-03
	Dissipation factor	1kHz7		0.010
		Dissipation factor	1MHz6		8E-03
			Dissipation factor	1MHz7		0.017
			Dissipation factor	Dissipation factor	耐电弧性		135	sec
Dielectric strength	Dry		54000	V
Dielectric strength	Dielectric strength	Wet		48000	V

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top