Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| transmittance | | ASTM D-1003 | 88 % |
| processability | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTM D-955 | 0.5～0.7 % |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| transmittance | | ASTM D1003/ISO 13468 | 88 % |
| other | Test Condition | Test Method | Test Result |
|---|
| purpose | | | 电子元件 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ASTM D-570 | 0.20 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTM D-790 | 2280(23300) MPa(Kgf/cm |
| Impact strength value | | ASTM D-256 | 780(80) j/m(kgf.cm/cm) |
| tensile strength | | ASTM D-638 | 63(640) MPa(Kgf/cm |
| tensile strength | | ASTM D-638 | 74(750) MPa(Kgf/cm |
| bending strength | | ASTM D-790 | 90(920) MPa(Kgf/cm |
| Tensile modulus | | ASTM D-638 | 2170(22100) MPa(Kgf/cm |
| Impact strength value | | ASTM D-256 | 100(10) j/m(kgf.cm/cm) |
| Rockwell hardness | | ASTM D-785 | 77 M标度 |
| compressive strength | | ASTM D-695 | 77(790) MPa(Kgf/cm |
| Stretching rate | | ASTM D-638 | 6 - |
| Stretching rate | | ASTM D-638 | 140 - |
| refractive index | | ASTM D-542 | 1.585 |
| tensile strength | | ASTM D638/ISO 527 | 63 kg/cm²(MPa)[Lb/in²] |
| elongation | | ASTM D638/ISO 527 | 6 % |
| Rockwell hardness | | ASTM D785 | 77 |
| Flexural modulus | | ASTM D790/ISO 178 | 2280 kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 90 kg/cm²(MPa)[Lb/in²] |
| Tensile elongation at break (elongation at break) | | ASTM D638/ISO 527 | 140 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dielectric tangent | | ASTM D-150 | 0.0004(0.009) |
| arc resistance | | ASTM D-495 | 110 sec |
| | IEC 112 | 300 V |
| Volume resistivity | | ASTM D-257 | 3 |
| dielectric breakdown strength | | ASTM D-149 | 30 KV/mm |
| permittivity | | ASTM D-150 | 2.95(2.9) |
| arc resistance | | ASTM D495/IEC 60112 | 110 |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.2 |
| Mold Shrinkage | | ASTM D955 | 0.5-0.7 % |
| Water absorption rate | | ASTM D570/ISO 62 | 0.2 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Load deflection temperature | | ASTM D-648 | 141 °C |
| | UL 746B | 125 °C |
| | UL 746B | 115 °C |
| | UL 746B | 125 °C |
| Load deflection temperature | | ASTM D-648 | 131 °C |
| linear expansion coefficient | | ASTM D-696 | 7 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices