Technical Data Sheet
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 93 |
| Shore hardness | | ASTM D2240 | 46 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTM D2863 | 39 % |
| toxicity | | NES713 | 1.90 |
| Acidic gas emission pH | | IEC 754-2 | 5.30 |
| Acid gas release | | IEC 754-2 | 0.630 µS/mm |
| Temperature index (combustion) - Critical | | | >300 °C |
| smoke | | | 23.0 |
| Smoke density | | ASTME662 | 1.4 |
| Smoke density | | ASTME662 | 1.5 |
| Smoke density | | ASTME662 | 9.1 |
| Smoke density | | ASTME662 | 2.5 |
| Smoke density | | ASTME662 | 22 |
| Smoke density | | ASTME662 | 110 |
| Smoke density | | ASTME662 | 6.9 |
| Smoke density | | ASTME662 | 0.040 |
| Smoke density | | ASTME662 | 55 |
| Smoke density | | ASTME662 | 28 |
| Smoke density | | ASTME662 | 130 |
| Smoke density | | ASTME662 | 330 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 11.7 Mpa |
| elongation | | ASTM D638 | 250 % |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | ASTM D470 | 8.00 kN/m |
| aging | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 100 % |
| Elongation retention rate | | ASTM D638 | 80 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 2.1E+14 ohms·cm |
| dielectric constant | | ASTM D150 | 3.80 |
| dielectric constant | | ASTM D150 | 3.43 |
| dielectric constant | | ASTM D150 | 3.50 |
| Dissipation Factor | | ASTM D150 | 0.034 |
| Dissipation Factor | | ASTM D150 | 7E-03 |
| Dissipation Factor | | ASTM D150 | 9E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | CCP METHOD | 2.7 % |
| Heat distortion temperature | | CCP METHOD | 87 % |
| brittle temperature | | ASTM D746 | -40.0 °C |
| Heat distortion temperature | | CCP METHOD | 1.3 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices