Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | % | 1.4 -- |
| Shrinkage rate | | % | 1.1 -- |
| Water absorption rate | | % | 9.0 -- |
| Water absorption rate | | % | 3.0 -- |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | MPa | 110 50.0 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Flammability level | | | HB -- |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Nominal tensile fracture strain | | % | 25 ＞50 |
| Tensile modulus | | MPa | 2400 900 |
| Tensile stress | | MPa | 65.0 40.0 |
| Tensile strain | | % | 4.0 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ohms | -- 1E+12 |
| Volume resistivity | | ohms·cm | 1E+14 1E+12 |
| dielectric strength | | kV/mm | 33 |
| CTI | | V | 600 600 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | °C | 160 -- |
| | °C | 55.0 -- |
| Continuous use temperature | | °C | 70.0到90.0 -- |
| Continuous use temperature | | °C | 160 -- |
| Melting temperature 4 | | °C | 222 -- |
| | cm/cm/°C | 9E-05 -- |
| | cm/cm/°C | 1.2E-04 -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices