TPE DGR6080
138
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 1.4 % | |
| ASTM D955 | 1.3 % | ||
| ASTM D955 | 0.50 % | ||
| ASTM D955 | 1.1 % | ||
| ISO 294-4 | 0.50 % | ||
| ISO 294-4 | 1.4 % | ||
| ISO 294-4 | 1.1 % | ||
| ISO 294-4 | 1.3 % | ||
| MeltViscosity | ASTM D3835 | 219 Pa·s |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 78 | |
| ISO 868 | 78 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Taber wear resistance | ASTM D1044 | 12.5 mg |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Stretch permanent deformation | ASTM D412 | 16 % | |
| tensile strength | ASTM D412 | 2.54 Mpa | |
| ISO 37 | 2.54 Mpa | ||
| ASTM D412 | 8.30 Mpa | ||
| ISO 37 | 8.30 Mpa | ||
| elongation | ASTM D412 | 310 % | |
| ISO 37 | 310 % | ||
| tear strength | ASTM D624 | 33.4 kN/m | |
| compression set | ASTM D395B | 26 % | |
| ASTM D395B | 48 % | ||
| ASTM D395B | 63 % | ||
| ISO 815 | 26 % | ||
| ISO 815 | 48 % | ||
| ISO 815 | 63 % |
| aging | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress change rate | ISO 1817 | -5.0 % | |
| ISO 1817 | 4.0 % | ||
| volume change | ASTM D471 | 54 % | |
| ASTM D471 | 6.0 % | ||
| ASTM D471 | 82 % | ||
| ASTM D471 | 1.0 % | ||
| ISO 1817 | 54 % | ||
| ISO 1817 | 6.0 % | ||
| ISO 1817 | 82 % | ||
| ISO 1817 | 1.0 % | ||
| Change rate of tensile strength in air | ASTM D573 | -2.0 % | |
| ASTM D573 | 7.0 % | ||
| ASTM D573 | -2.0 % | ||
| ASTM D573 | 7.0 % | ||
| ISO 188 | -2.0 % | ||
| ISO 188 | 7.0 % | ||
| ISO 188 | -2.0 % | ||
| ISO 188 | 7.0 % | ||
| Change rate of ultimate elongation in air | ASTM D573 | -5.0 % | |
| ASTM D573 | 4.0 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | ASTM D746 | -61.1 °C | |
| ISO 812 | -61.1 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top