HDPE PRE-ELEC® PE 1296

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
melt mass-flow rate		ISO1133	0.60 g/10min
Shrinkage rate		ASTMD955	2.5to3.5 %
Shrinkage rate	Shrinkage rate		ISO294-4	2.5to3.5 %
density		ASTMD792	1.11 g/cm³
density	density		ISO1183	1.12 g/cm³

hardness	Test Condition	Test Method	Test Result
	Shore A	ISO868	95
			ISO868	65

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTMD638	13.1 MPa
tensile strength		ISO527-2	13.0 MPa
Tensile strain	Yield	ISO527-2	12 %
Tensile strain	Tensile strain		ISO527-2	40 %
Flexural modulus		ASTMD790	1200 MPa
Flexural modulus	Flexural modulus		ISO178	1200 MPa
Tensile stress	Yield	ISO527-2	24.0 MPa

Impact resistance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength		ASTMD256	NoBreak
		ISO180	NoBreak
			ISO180	NoBreak
Impact strength of cantilever beam gap		ISO180	60 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO180	71 kJ/m²
CharpyNotchedImpactStrength		ASTMD256	61 kJ/m²
	CharpyNotchedImpactStrength		ISO179	60 kJ/m²
		CharpyNotchedImpactStrength		ISO179	65 kJ/m²
		CharpyNotchedImpactStrength	CharpyNotchedImpactStrength		ASTMD256	67 kJ/m²
Impact strength of simply supported beam without notch		ASTMD256	NoBreak
	Impact strength of simply supported beam without notch		ISO179	NoBreak
		Impact strength of simply supported beam without notch		ISO179	NoBreak
		Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ASTMD256	NoBreak
NotchedIzodImpact(Area)		ASTMD256	60.9 kJ/m²
NotchedIzodImpact(Area)	NotchedIzodImpact(Area)		ASTMD256	73.6 kJ/m²
Suspended wall beam without notch impact strength		ASTMD256	NoBreak

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ESDSTM11.11	<1.0E+5 ohms
Surface Resistivity	Surface Resistivity		IEC61340-2-3	<1.0E+5 ohms
Volume resistivity		内部方法	<1.0E+3 ohms·cm

Thermal performance	Test Condition	Test Method	Test Result
		ASTMD648A	43.3 °C
			ISO75-2/Af	43.0 °C
vicat		ASTMD15254	129 °C
	vicat		ASTMD15255	76.1 °C
		vicat		ISO306/A50	129 °C
		vicat	vicat		ISO306/B50	73.0 °C
		ASTMD648B	76.7 °C
			ISO75-2/Bf	77.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top