Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D1238 | 16 g/10 min |
| Water absorption rate | | ASTM D570 | 0.15 % |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| Haze ratio | | ASTM D1003 | 0.40 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-2 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 69.0 Mpa |
| elongation | | ASTM D638 | 130 % |
| Flexural modulus | | ASTM D790 | 2250 Mpa |
| bending strength | | ASTM D790 | 93.0 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 4.0E+16 ohms·cm |
| dielectric strength | | ASTM D149 | 30 KV/mm |
| arc resistance | | ASTM D495 | 120 sec |
| injection | Test Condition | Test Method | Test Result |
|---|
| drying temperature | | | 120 °C |
| drying time | | | 3.0 到 5.0 hr |
| Suggested maximum moisture content | | | 0.020 % |
| Temperature at the rear of the barrel | | | 235 到 260 °C |
| Temperature in the middle of the barrel | | | 250 到 275 °C |
| Temperature at the front of the material cylinder | | | 265 到 290 °C |
| Spray nozzle temperature | | | 265 到 300 °C |
| Processing (melt) temperature | | | 265 到 300 °C |
| Temperature | | | 65 到 105 °C |
| Back pressure | | | 0.250 到 0.700 Mpa |
| screw speed | | | 40 到 70 rpm |
| Exhaust hole depth | | | 0.020 到 0.080 mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Thermal deformation temperature under load | | ASTM D648 | 134 °C |
| | ASTM D696 | 5.0E-5 到 7.0E-5 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices