ABS FN-800W
0
- Properties:It has the characteristics of good balance between rigidity and toughnessgood flowabilitylow injection temperaturegood resistance to melt drippinggood dimensional stabilityand high cost-effectiveness
- Usages:Suitable for making electrical enclosuresautomotive parts
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ≥5 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| IZOD notch impact strength | ≥15 KJ/m | ||
| bending strength | ≥65 MPa | ||
| Flexural modulus | ≥2400 MPa | ||
| tensile strength | ≥45 MPa | ||
| Elongation | ≥8 % |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Vertical combustion | 无滴落 | ||
| Parallel combustion | 无滴落 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| HTD | ≥82 ℃ | ||
| Flame retardancy | V-0级 UL 94 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top