PP Daelim Poly® EP1904

Properties:
High rigidity
Middle flow
Low shrinkage
High gloss
High impact resistance
Good impact resistance
Good stiffness
High gloss
The impact of copolymers
Low shrinkage
Moderate flow
Usages:
Toy
Household daily necessities
sporting goods
Loading box
container
Home Furnishings
sporting goods
Toys
Compare
View Prices

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result
gloss		ASTM D2457	100

Basic performance	Test Condition	Test Method	Test Result
density		ISO 1183	0.9 g/cm³
melt mass-flow rate		ISO 1133	22 g/10min

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527	1150 Mpa
Tensile strain		ISO 527	22 %
Tensile strain	Tensile strain		ISO 527	17 %
Flexural modulus		ISO 178	1000 Mpa
Impact strength of simply supported beam without notch		ISO 179/1eA	3.3
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO 179/1eA	21
Impact strength of cantilever beam gap		ISO 180/1A	3.7
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO 180/1A	20

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75B-1	88 °C
vicat		ISO 306/A50	127 °C
vicat	vicat		ISO 306/B50	85 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PP Daelim Poly® EP1904

Technical Data Sheet

You May Like