Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | | 1.19 g/cm³ |
Viscosity | | | 500 mPa·s |
hardness | Test Condition | Test Method | Test Result |
---|
Shore hardness | | | 81 |
Supplementary Information | Test Condition | Test Method | Test Result |
---|
CriticalExposure | | | 13.0 mJ/cm² |
Puncture Strength | | | 135.0 µm |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Tensile modulus | | | 2700 MPa |
tensile strength | | | 66.0 MPa |
elongation | Break | | 10 % |
Flexural modulus | | | 2500 MPa |
bending strength | | | 85.0 MPa |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Suspended wall beam without notch impact strength | | | 32to38 J/m |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | | 49.0 °C |
Glass Transition Temperature | | DMA | 78.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.