TPV EPIGUM OR/87 CROSSPOLIMERI ITALY

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index		ASTM D2863	20	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Break	IEC 60811	>250	%
tensile strength	Yield	IEC 60811	>15.0	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
thermosetting	Residual:200°C	IEC 60811	0.0	%
thermosetting	thermosetting	200°C	IEC 60811	15	%
Usage temperature			-40-125	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.15	g/cm³
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ASTM D2240	45
aging	Test Condition	Test Method	Test Result	Test Unit
Volume change	150°C,240hr,在ASTM#2油中	IEC 60811	<5.0	%
	Volume change	121°C,18hr,在IRM903油中	IEC 60811	<3.0	%
	Volume change	Volume change	121°C,18hr,在IRM902油中	IEC 60811	<3.0	%
Shore hardness	ShoreA,150°C,240hr,在ASTM#2油中	IEC 60811	<5.0
	Shore hardness	ShoreA,121°C,18hr,在IRM903油中	IEC 60811	<3.0
	Shore hardness	Shore hardness	ShoreA,121°C,18hr,在IRM902油中	IEC 60811	<3.0
Change rate of tensile strength in air	121°C,18hr,在IRM903油中	IEC 60811	>12	%
Change rate of tensile strength in air	Change rate of tensile strength in air	121°C,18hr,在IRM902油中	IEC 60811	>12	%
Volume change in air	150°C,240hr	IEC 60811	<5.0	%
Change rate of hardness (Shore) in the air	ShoreA,150°C,240hr	IEC 60811	<5.0
Tensile stress change rate	150°C,240hr，Break	IEC 60811	>200	%
Change rate of tensile strength in air	150°C,240hr	IEC 60811	>13	%
Tensile stress change rate	150°C,240hr,在ASTM#2油中，Break	IEC 60811	>200	%
	Tensile stress change rate	121°C,18hr,在IRM903油中，Break	IEC 60811	>200	%
	Tensile stress change rate	Tensile stress change rate	121°C,18hr,在IRM902油中，Break	IEC 60811	>200	%
Change rate of tensile strength in air	150°C,240hr,在ASTM#2油中	IEC 60811	>13	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top