PET FR530 NC010 DUPONT USA

107

Form：Granules | Grade：Injection grade

Properties:

enhanceGlass fiber reinforcedwear resistantHigh rigidityHigh temperature resistan

Typical Applications:

Electrical fieldElectronic fieldHousehold appliancesHousehold appliancesAutomotive sector

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field \| Household appliances \| Household appliances \| Automotive sector
Properties:	enhance \| Glass fiber reinforced \| wear resistant \| High rigidity \| High temperature resistan

Certificates

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			15%玻纤增强.阻燃.电气和机械性能.高温、阻力和流量
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Suspended wall beam without notch impact strength		ASTM D256	585	J/m
compressive strength		ASTM D695	200	Mpa
tensile strength		ASTM D638	138	Mpa
Tensile modulus		ASTM D638	11000	Mpa
Bending modulus		ASTM D790	10300	Mpa
bending strength		ASTM D790	200	Mpa
Elongation at Break		ASTM D638	2.1	%
Impact strength of cantilever beam gap		ASTM D256	80	J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D256	91	J/m
Tensile modulus		ASTM D412/ISO 527	11500	kg/cm²(MPa)[Lb/in²]
Bending modulus		ASTM D790/ISO 178	10500	kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	200	kg/cm²(MPa)[Lb/in²]
Tensile modulus	23℃，Injection	ISO 527-1	11500	MPa
Bending modulus	23℃,压缩模塑	ISO 178	10500	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	66 psi， Unannealed	ASTM D648	246	°C
Hot deformation temperature	Hot deformation temperature	264 psi，Unannealed	ASTM D648	224	°C
Linear coefficient of thermal expansion		ASTM E831	0.000019	cm/cm/ ℃
Melting temperature			254	°C
UL flame retardant rating		UL 94	V-0
Extreme Oxygen Index		ASTM D2863	33	%
Combustibility (rate)		UL 94	V-0
Hot deformation temperature	HDT	ASTM D648/ISO 75	243	℃（℉）
Hot deformation temperature	Hot deformation temperature	HDT	ASTM D648/ISO 75	225	℃（℉）
Melting temperature			252	℃（℉）
UL flame retardant rating	0.900mm	UL94	5VA
	UL flame retardant rating	0.350mm	UL94	V-0
		UL flame retardant rating	3.00mm	UL94	V-0
			UL flame retardant rating	2.00mm	UL94	V-0
				UL flame retardant rating	0.900mm	UL94	V-0
					UL flame retardant rating	1.50mm	UL94	V-0
					UL flame retardant rating	UL flame retardant rating	0.750mm	UL94	V-0
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	3.20 mm，平行Flow	ASTM D955	0.0025	cm/cm
Shrinkage rate	Shrinkage rate	3.20 mm，垂直	ASTM D955	0.0075	cm/cm
density		ASTM D792/ISO 1183	1680
Shrinkage rate		ASTM D955	0.8	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top