Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| PostShrinkage | | ISO2577 | 0.050 % |
| density | | ISO1183 | 1.70 g/cm³ |
| Apparent density | | ISO60 | 0.70 g/cm³ |
| Shrinkage rate | | ISO2577 | 0.20 % |
| Water absorption rate- | | ISO62 | 12.0 mg |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| CompressionMoldingPressure | | | >15.0 MPa |
| CompressionMoldingTemperature | | | 160到190 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2/1 | 17000 MPa |
| Flexural modulus | | ISO178 | 15500 MPa |
| Bending stress | | ISO178 | 215 MPa |
| compression stress | | ISO604 | 250 MPa |
| Tensile stress | | ISO527-2/5 | 115 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179/1eA | 4.5 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 17 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC60093 | 1E+12 ohms·cm |
| dielectric strength | | IEC60243-1 | 34 kV/mm |
| | IEC60250 | 6.00 |
| Dissipation Factor | | IEC60250 | 0.10 |
| Surface Resistivity | | IEC60093 | 1E+11 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/C | 170 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare