Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.44 g/cm³ |
| Shrinkage rate | | | 0.40到0.60 % |
| Water absorption rate | | ISO62 | 0.80 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 800 °C |
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Yield | ISO527-2 | 130 MPa |
| Tensile stress | Break | ISO527-2 | 130 MPa |
| Tensile strain | Yield | ISO527-2 | 2.5 % |
| Tensile modulus | | ISO527-2 | 8800 MPa |
| Tensile strain | Break | ISO527-2 | 2.5 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180/A | 7.5 kJ/m² |
| | ISO180 | 62 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| CTI | | IEC60112 | >600 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/A | 205 °C |
| | | 120 °C |
| vicat | | ISO306/A120 | 220 °C |
| BallPressure Test | | IEC60695-10-2 | 通过 |
| melting temperature | | DSC | 222 °C |
| | ISO75-2/B | 208 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare