Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.30 g/cm³ |
| Melt volume flow rate | | ISO1133 | 11.0 cm³/10min |
| Shrinkage rate | | ISO294-4 | 1.1 % |
| Shrinkage rate | | ISO294-4 | 0.90 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 825 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179/1eA | 7.0 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | NoBreak |
| Impact strength of simply supported beam without notch | | ISO179/1eU | NoBreak |
| Charpy Notched Impact Strength | | ISO179/1eA | 6.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 3500 MPa |
| Tensile stress | Yield | ISO527-2 | 96.0 MPa |
| Tensile strain | Yield | ISO527-2 | 5.0 % |
| Tensile strain | Break | ISO527-2 | 30 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| | IEC60250 | 2.80 |
| | IEC60250 | 2.80 |
| CTI | | IEC60112 | 175 V |
| Volume resistivity | | IEC60093 | 1E+15 ohms·cm |
| dielectric strength | | IEC60243-1 | 16 kV/mm |
| Surface Resistivity | | IEC60093 | 1E+14 ohms |
| CTI | | IEC60112 | 200 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| vicat | | ISO306/A | 335 °C |
| vicat | | ISO306/B | 305 °C |
| | ISO3146 | 340 °C |
| | ISO11359-2 | 6E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare