Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.65 g/cm³ |
| moisture absorption | | ASTM D570 | 0.03 % |
| ash content | | 内部测试方法 | 30 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Hardness (Rockwell R) | | ASTM D785 | 121 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 1295 kg/m² |
| elongation | | ASTM D638 | 3.4 % |
| bending strength | | ASTM D790 | 2020 kg/m² |
| Flexural modulus | | ASTM D790 | 90000 kg/m² |
| Impact strength of cantilever beam gap | | ASTM D256 | 10 kg-cm/cm |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| UL flame retardant rating | | UL 94 | V-0 5VA |
| UL flame retardant rating | | UL 94 | V-0 5VA |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Linear coefficient of thermal expansion | | ASTM D696 | 3000000000000000 cm/cm/℃ |
| Volume resistivity | | ASTM D257 | 1000000000000000 Ω.cm |
| Surface Resistivity | | ASTM D257 | 10000000000000 Ω |
| Insulation cohesion | | ASTM D149 | 20 KC/mm |
| dielectric constant | | ASTM D150 | 3.5 |
| Dissipation Factor | | ASTM D150 | 20 |
| arc resistance | | ASTM D495 | 90 S |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 200 °C |
| Heat distortion temperature | | ASTM D648 | 210 °C |
| Network melting temperature | | 内部测试方法 | 225 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices