Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTM D-955 | 0.4 % |
| melt mass-flow rate | | ASTM D1238 | 0.80 g/10min |
| melt mass-flow rate | | ASTM D1238 | 8.0 g/10min |
| Shrinkage rate | | ASTM D955 | <0.40 % |
| density | | ASTM D792 | 1.03 g/cm³ |
| Water absorption rate | | ASTM D570 | <0.30 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 100 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D-1238 | 0.8 g/10min |
| melt mass-flow rate | | ASTM D-1238 | 8.0 g/10min |
| density | | ASTM D-792 | 1.03 |
| Water absorption rate | | ASTM D-570 | 0.3 wt% |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| flexural coefficient | | ASTM D-790 | 20000 kg/cm |
| flexural coefficient | | ASTM D-790 | 290000 psi |
| Rockwell hardness | | | 100 |
| Impact strength of cantilever beam gap | | ASTM D-256 | 38 (7.0) kg.cm/cm(ft.1b/in) |
| Impact strength of cantilever beam gap | | ASTM D-256 | 53 (9.8) kg.cm/cm(ft.1b/in) |
| tensile strength | | ASTM D-638 | 350 kg/cm |
| tensile strength | | ASTM D-638 | 5000 psi |
| tensile strength | | ASTM D-638 | 4300 kg/cm |
| tensile strength | | ASTM D-638 | 300 psi |
| elongation at break | | ASTM D-638 | 50 % |
| bending strength | | ASTM D-790 | 600 kg/cm |
| bending strength | | ASTM D-790 | 8500 psi |
| bending strength | | ASTM D790 | 58.6 Mpa |
| Flexural modulus | | ASTM D790 | 2000 Mpa |
| elongation | | ASTM D638 | 90 % |
| tensile strength | | ASTM D638 | 27.6 Mpa |
| tensile strength | | ASTM D638 | 32.4 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 450 J/m |
| Impact strength of cantilever beam gap | | ASTM D256 | 490 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D-1525 | 85(185) ℃(F) |
| vicat | | ASTM D-1525 | 100 °C |
| UL flame retardant rating | | UL 94 | HB |
| vicat | | ASTM D15254 | 102 °C |
| Heat distortion temperature | | ASTM D648 | 85.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices