Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ISO 294-4 | 0.2 % |
| Shrinkage rate | | ISO 294-4 | 0.4 % |
| Thermal Properties | Test Condition | Test Method | Test Result |
|---|
| RTI Imp | | UL 746B | 65 °C |
| RTI Imp | | UL 746B | 65 °C |
| RTI Imp | | UL 746B | 65 °C |
| RTI Elec | | UL 746B | 65 °C |
| RTI Elec | | UL 746B | 65 °C |
| RTI Elec | | UL 746B | 65 °C |
| Linear coefficient of thermal expansion | | ISO 11359-1/-2 | 14 E-6/K |
| Linear coefficient of thermal expansion | | ISO 11359-1/-2 | 17 E-6/K |
| Linear coefficient of thermal expansion | | ISO 11359-1/-2 | 55 E-6/K |
| Linear coefficient of thermal expansion | | ISO 11359-1/-2 | 55 E-6/K |
| melting temperature | | ISO 11357-1/-3 | 260 °C |
| combustibility | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | 0.75 mm |
| UL flame retardant rating | | UL 94 | 1.5 mm |
| Limiting Oxygen Index (LOI) | | ISO 4589-1/-2 | 27 % |
| FMVSS combustion rate | | FMVSS 302 | B - |
| burning rate | | ISO 3795 | 25 mm/min |
| Electrical Property | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC 60093 | 10000000000000 Ohm-m |
| Compared to the Leakage Traceability Index (CTI) | | IEC 60112 | 600 - |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ISO 527-1/-2 | 215 Mpa |
| tensile strength | | ISO 527-1/-2 | 250 Mpa |
| elongation at break | | ISO 527-1/-2 | 3.2 % |
| elongation at break | | ISO 527-1/-2 | 2.8 % |
| Flexural modulus | | ISO 178 | 15000 Mpa |
| Tensile modulus | | ISO 527-1/-2 | 16300 Mpa |
| Tensile modulus | | ISO 527-1/-2 | 16500 Mpa |
| Poisson's ratio | | ISO 527-1/-2 | 14 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179/1eA | 15 kJ/m² |
| Charpy Notched Impact Strength | | ISO 179/1eA | 95 kJ/m² |
| Impact strength of cantilever beam gap | | ISO 180/1A | 15 kJ/m² |
| Impact strength of cantilever beam gap | | ISO 180/1A | 236 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices