PA6 YH-3000 SINOPEC BALING
40
- Properties:wear resistanthigh strengthhigh viscosityHigh viscosity
- Usages:Industrial applicationsSuitable for industrial use and high strengthWear resistant and other products
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| relative viscosity | GB/T 1632-93 | 3.00±0.03 --- | |
| density | GB 1033-86 | 1.157 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | GB 9341-88 | 66.8 R | |
| Shrinkage rate | GB/T 1043-93 | 1.47 % | |
| Flexural modulus | GB 9341-88 | 2065 Mpa | |
| Impact strength of cantilever beam gap | IEC (CTI) | 21.4 KJ/m | |
| bending strength | GB 9341-88 | 86.3 Mpa | |
| elongation at break | GB 1040-92 | 151.8 % | |
| tensile strength | GB 1040-92 | 66.1 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | GB 1044-70 | 1.5*10 Ω.cm | |
| GB 1044-70 | 2.8*10 Ω | ||
| dielectric constant | GB 1044-70 | 1.5 --- | |
| Surface Resistivity | --- | 9.0*10 Ω | |
| GB 1044-70 | 7.4*10 Ω | ||
| Dielectric loss | GB 1044-70 | 4.2*10 --- |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | --- | 75.0 °C | |
| melting temperature | --- | 218-224 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top