ASA 757R BASF GERMANY

Form：Granules | Grade：Injection grade

Properties:

Chemical resistanceHigh rigidity

Typical Applications:

doors and windowsHousehold daily necessitiesHousehold goods

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	doors and windows \| Household daily necessities \| Household goods
Properties:	Chemical resistance \| High rigidity

Certificates

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ISO 180/A	13	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30°C	ISO 180/A	3.0	kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179	12	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C	ISO 179	3.0	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	2600	Mpa
bending strength		ISO 178	80.0	Mpa
Tensile creep modulus	1000hr	ISO 899-1	1400	Mpa
Tensile strain	Yield,23°C	ISO 527-2	3.1	%
tensile strength	Yield,23°C	ISO 527-2	56.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
thermal conductivity		DIN 52612	0.17	W/m/K
Linear coefficient of thermal expansion	MD	ISO 11359-2	8.0E-5到1.1E-4	cm/cm/°C
Vicat softening temperature	--	ISO 306/B50	98.0	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/A50	105	°C
Hot deformation temperature	1.8MPa,Annealed	ISO 75-2/A	97.0	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Annealed	ISO 75-2/B	101	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.35	%
Water absorption rate	Water absorption rate	Saturation,23°C	ISO 62	1.7	%
Melt Volume Flow Rate (MVR)	220°C/10.0kg	ISO 1133	8.00	cm3/10min
density		ISO 1183	1.07	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	100Hz	IEC 60250	9E-03
Dissipation factor	Dissipation factor	1MHz	IEC 60250	0.025
Dielectric constant	1.00mm,1MHz	IEC 60250	3.40
Dielectric constant	Dielectric constant	100Hz	IEC 60250	3.70
Volume resistivity		IEC 60093	1E+14	ohms·cm
Surface resistivity		IEC 60093	1E+13	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test		ISO 2039-1	100	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top