
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 60 | kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 55 | kJ/m² |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 960 | °C |
| Hot filament ignition temperature | 1.5mm | IEC 60695-2-13 | 775 | °C |
| 3.0mm | IEC 60695-2-13 | 775 | °C | |
| UL flame retardant rating | 0.75mm | UL 94 | V-0 | |
| 1.5mm | UL 94 | V-0 | ||
| 3.0mm | UL 94 | V-0 | ||
| Burning wire flammability index | 0.75mm | IEC 60695-2-12 | 960 | °C |
| 1.5mm | IEC 60695-2-12 | 960 | °C | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | 23°C | ISO 178/A | 9200 | Mpa |
| bending strength | 3.5%Strain,23°C | ISO 178/A | -- | Mpa |
| 23°C4 | ISO 178/A | 210 | Mpa | |
| Bending strain | 23°C | ISO 178/A | 3.3 | % |
| Tensile modulus | 23°C | ISO 527-2/1 | 9500 | Mpa |
| tensile strength | Break,23°C | ISO 527-2/5 | 130 | Mpa |
| Tensile strain | Break,23°C | ISO 527-2/5 | 2.8 | % |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Melting temperature | ISO 11357-3 | 222 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 202 | °C |
| Vicat softening temperature | ISO 306/B120 | 213 | °C | |
| Ball Pressure Test | 210°C | IEC 60695-10-2 | Pass | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | TD:260°C,2.00mm2 | ISO 2577 | 0.60 | % |
| TD:120°C,4hr,2.00mm3 | ISO 2577 | 0.10 | % | |
| MD:260°C,2.00mm2 | ISO 2577 | 0.30 | % | |
| MD:120°C,4hr,2.00mm3 | ISO 2577 | 0.10 | % | |
| Water absorption rate | Saturation,23°C | ISO 62 | 5.0 | % |
| Equilibrium,23°C,50%RH | ISO 62 | 1.5 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | IEC 60093 | 4E+15 | ohms | |
| Volume resistivity | 23°C | IEC 60093 | 5E+15 | ohms·cm |
| Dielectric strength | 23°C,1.00mm | IEC 60243-1 | 39 | KV/mm |
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 0 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| ISO Shortcut | ISO 1874 | PA6.GFHR.10-090.GF25 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.