
Epoxy EPO-TEK® TJ1183-LH Epoxy Technology Inc.
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| Cured Properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Dissipation factor | 1kHz | 0.010 | ||
| Volume resistivity | 23°C | >1.0E+13 | ohms·cm | |
| Relative permittivity | 1kHz | 3.17 | ||
| LapShearStrength | 23°C | >13.8 | MPa | |
| Shore hardness | ShoreD | 85 | ||
| Uncured Properties | Test Condition | Test Method | Test Result | Test Unit |
| storage stability | 13000 | min | ||
| Curing time | 150°C | 1.0 | hr | |
| viscosity | 23°C | 25to40 | Pa·s | |
| density | 1.52 | g/cm³ | ||
| Color | Yellow | |||
| thermosetting | Test Condition | Test Method | Test Result | Test Unit |
| shelf-life | -40°C | 52 | wk | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | MD:导热系数 | 0.38 | W/m/K | |
| MD:--4 | 1.5E-04 | cm/cm/°C | ||
| MD:--3 | 4.7E-05 | cm/cm/°C | ||
| Glass transition temperature | >90.0 | °C | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Particle size distribution | <20.0 | µm | ||
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| Shear Strength | 23°C | 58.6 | MPa | |
| DegradationTemperature | 412 | °C | ||
| operate temperature | Intermittent | -55-350 | °C | |
| Continuous | -55-250 | °C | ||
| weight loss on heating | 300°C | 0.66 | % | |
| 250°C | 0.24 | % | ||
| 200°C | 0.050 | % | ||
| operate temperature | ThixotropicIndex | 2.60 | ||
| StorageModulus | 6.21 | GPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.