HDPE MF3313
0
- Usages:Extrusionfilmblow molded bags
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 0.933 g/cm3 | |
| melt mass-flow rate | ISO 1133 | 0.1 dg/10min | |
| ISO 1133 | 12.5 dg/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation at break | ISO 527-1 | 600 % | |
| Elmendorf tear strength | ISO 6368-2 | 330 mN | |
| ISO 6368-2 | 2000 mN | ||
| Tensile modulus | ISO 527-1 | 620 MPa | |
| tensile strength | ISO 527-1,3 | 55 MPa | |
| ISO 527-1,3 | 43 MPa | ||
| elongation at break | ISO 527-1 | 600 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting point | ISO 3146 | 124 ℃ | |
| ISO 306 | 116 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top