HDPE 1000-B160CF

Properties:
Features: While maintaining its original performance
it greatly improves flowability
especially in the fields of anti-corrosion
wear resistance
self-lubrication
etc. It can replace fluoroplastics such as polytetrafluoroethylene. 1. It can continuously and quickly extrude wear-resistant slide rails
profiles
sheets
pipelines on ordinary extruders. 2. It can inject self-lubricating wear-resistant shaft sleeves
conveyor belt idlers
slides
anti-corrosion pumps
valves
impellers
pump shells on ordinary injection machines. 3
Usages:
Suitable for suppression
Compare

Technical Data Sheet

Basic performance	Test Condition	Test Method	Test Result
density			0.945 g/cm3
melt mass-flow rate			0.50 g/10min

Other performance	Test Condition	Test Method	Test Result
Wear rate of mortar method			0.25 ％

Mechanical properties	Test Condition	Test Method	Test Result
Flexural modulus			800-1000 MPa
Shore hardness			57
tensile strength			24.6 MPa
Elongation			＞340 ％
Charpy Notched Impact Strength			110 KJ/m2
bending strength			15.2 MPa
Impact strength of cantilever beam gap			56.6 KJ/m2

Thermal performance	Test Condition	Test Method	Test Result
			78 ℃
brittle temperature			-80 ℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top