Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.73 g/cm³ |
| Shrinkage rate | | ISO294-4 | 0.20到0.50 % |
| Water absorption rate | | ISO62 | 0.80 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-2 |
| UL flame retardant rating | | UL94 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Break | ISO527-2 | 94.0 MPa |
| Tensile strain | Break | ISO527-2 | 1.5到2.5 % |
| Flexural modulus | | ISO178 | 7600 MPa |
| Bending stress | | ISO178 | 132 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180/1A | 3.0 kJ/m² |
| | ISO180/1U | 22 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| CTI | | IEC60112 | 600 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/Af | 178 °C |
| vicat | | ISO306/B120 | 202 °C |
| thermal conductivity | | ASTME1530 | 1.0 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare