
PES 3300 PREM SOLVAY USA
185
Form:Granules
Properties:
Flame retardantHigh temperature resistanGood dimensional stabilit
Typical Applications:
Food service sectorcurrency
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Food service sector | currency |
| Properties: | Flame retardant | High temperature resistan | Good dimensional stabilit |
Certificates

Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.75mm | UL 94 | V-0 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | 23℃ | ASTM D256 | 53.4 | J/m |
| bending strength | ASTM D790 | 125 | Mpa | |
| Bending modulus | ASTM D790 | 2620 | Mpa | |
| elongation | Yield | ASTM D638 | 6.5 | % |
| tensile strength | ASTM D638 | 88.9 | Mpa | |
| Tensile modulus | ASTM D638 | 2690 | Mpa | |
| tensile strength | 23℃ | ASTM D638 | 88.9 | MPa |
| bending strength | 23℃ | ASTM D790 | 114 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | ASTM D696 | 0.00058 | cm/cm/℃ | |
| Continuous use temperature | ASTM D794 | 180 | ℃ | |
| Hot deformation temperature | 1.82MPa | ASTM D648 | 195 | ℃ |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 5.2E-05 | cm/cm/°C |
| Hot deformation temperature | 1.8MPa,Annealed | ASTM D648 | 200 | °C |
| Glass transition temperature | DSC | 223 | ℃ | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 30天 | ASTM D570 | 1.9 | % |
| 24hr | ASTM D570 | 0.50 | % | |
| Shrinkage rate | MD | ASTM D955 | 0.60 | % |
| melt mass-flow rate | 380°C/2.16kg | ASTM D1238 | 30 | g/10min |
| 2.16kg@380℃ | ASTM D1238 | 16-25 | g/10min | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Relative track index | ASTM D3638 | 150 | V | |
| Dielectric constant | 23℃,60Hz | ASTM D150 | 3.20 | |
| Dissipation factor | 1MHz | ASTM D150 | 5.6E-03 | |
| 1kHz | ASTM D150 | 2.2E-03 | ||
| 60Hz | ASTM D150 | 1.7E-03 | ||
| Dielectric constant | 1MHz | ASTM D150 | 3.54 | |
| 1kHz | ASTM D150 | 3.50 | ||
| 60Hz | ASTM D150 | 3.51 | ||
| Dielectric strength | ASTM D149 | 15 | KV/mm | |
| Volume resistivity | ASTM D257 | 1.7E+15 | ohms·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.