PC LUBEXAN 1522 NATURAL

Compare

Technical Data Sheet

physical property	Test Method	Test Result
Water absorption rate	ISO 62	0.36 %
density	ISO 1183/A	1.17to1.21 g/cm³
melt mass-flow rate	ISO 1133	15to22 g/10min
Water absorption rate	ISO 62	0.15 %

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	V-2
Burning wire flammability index		IEC 60695-2-12	850 °C

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2/1A/1	2500to3000 MPa
tensile strength	Yield	ISO 527-2/1A/50	60.0to70.0 MPa
tensile strength	tensile strength	Break	ISO 527-2/1A/50	45.0to55.0 MPa
Tensile strain	Yield	ISO 527-2/1A/50	7.0to12 %
Tensile strain	Tensile strain	Break	ISO 527-2/1A/50	25to30 %
Flexural modulus		ISO 178	2000to2500 MPa
bending strength		ISO 178	55.0to65.0 MPa

Impact resistance	Test Method	Test Result
Impact strength of simply supported beam without notch	ISO 179/1eU	无断裂
Impact strength of cantilever beam gap	ASTM D256	无断裂
Suspended wall beam without notch impact strength	ISO 180	无断裂

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	125to135 °C
Glass Transition Temperature		内部方法	140to150 °C
vicat		ISO 306/A120	135to145 °C
vicat	vicat		ISO 306/B120	130to140 °C
Heat distortion temperature		ASTM D648	130to140 °C
Heat distortion temperature	Heat distortion temperature		ISO 75-2/B	135to145 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top