PA66 Radiflam® A RV 350K RADIC ITALY
28
- Properties:Filler: Glass fiber reinf35% filler by weight
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ASTM D15258 | 85 kJ/m² |
| 23°C | ASTM D15258 | 100 kJ/m² |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| 1.6mm | UL 94 | HB |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 11900 Mpa | |
| tensile strength | Break | ISO 527-2 | 195 Mpa |
| Tensile strain | Break | ISO 527-2 | 3.1 % |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/Bf | 255 °C |
| 1.8MPa,Unannealed | ISO 75-2/Af | 240 °C | |
| Vicat softening temperature | ISO 306/B50 | 245 °C | |
| Melting temperature | ISO 3146 | 260 °C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | Saturation,23°C | ISO 62 | 6.3 % |
| Equilibrium,23°C,50%RH | ISO 62 | 1.5 % | |
| Stickiness | ISO 307 | 145 cm³/g |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface resistivity | IEC 60093 | 1E+12 ohms | |
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| Compared to the anti leakage trace index | IEC 60112 | V |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.