Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Melt volume flow rate | | ISO1133 | 175 cm3/10min |
| Water absorption rate | | ISO62 | 9.5 % |
| Water absorption rate | | ISO62 | 3.0 % |
| density | | ISO1183 | 1.13 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO2039-1 | 160 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179 | 200 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179 | 250 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180 | 3.0 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180 | 4.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO179 | 3.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO179 | 4.0 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 3400 Mpa |
| Tensile stress | | ISO527-2 | 90.0 Mpa |
| Tensile strain | | ISO527-2 | 4.0 % |
| Nominal tensile fracture strain | | ISO527-2 | 10 % |
| Flexural modulus | | ISO178 | 3000 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC60093 | 1E+15 ohms·cm |
| dielectric constant | | IEC60250 | 3.30 |
| Dissipation Factor | | IEC60250 | 0.030 |
| CTI | | IEC60112 | 600 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/A | 65.0 °C |
| | ISO3146 | 220 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices