PP Copolymer Piolen® P T40FRA37 PiO Kunststoffe GmbH & Co KG

Properties:
Filler
PiO
Kunststoffe
German PiO
Kunststoffe
Usages:
Electrical enclosure
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ISO 1183	1.41 g/cm³
melt mass-flow rate		ISO 1133	13 g/10min

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	V-1

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179/1eU	15 kJ/m²
Charpy Notched Impact Strength		ISO 179/1eA	2.0 kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength		ISO 179/1eA	4.0 kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1eU	9.0 kJ/m²

Mechanical properties	Test Condition	Test Method	Test Result
Flexural modulus		ISO 178	3900 MPa
tensile strength	Yield	ISO 527-2	19.7 MPa
tensile strength	tensile strength	Break	ISO 527-2	16.8 MPa
Tensile strain	Break	ISO 527-2	4.1 %

Thermal performance	Test Condition	Test Method	Test Result
vicat		ISO 306/A	156 °C
vicat	vicat		ISO 306/B	87.0 °C
Crystallization peak temperature		ISO 3146	158to171 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top