PP W331 TPC SINGAPORE

Form：Granules | Grade：Injection grade

Typical Applications:

bottle

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:

bottle

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
purpose			ISBM
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D-792	0.90
melt mass-flow rate		ASTM D-1238	7	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ASTM D790	1030	Mpa
elongation	Yield	ASTM D638	>800	%
tensile strength	Break	ASTM D638	45.0	Mpa
elongation	Break	ASTM D-638	>880	%
tensile strength	Break	ASTM D-638	27.5	Mpa
Bending modulus		ASTM D790/ISO 178	1030	kg/cm²(MPa)[Lb/in²]
Rockwell hardness		ASTM D785	89
Impact strength of cantilever beam gap		ASTM D256/ISO 179	3.6	kg·cm/cm(J/M)ft·lb/in
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature			151	°C
Hot deformation temperature	0.45MPa,Unannealed	ASTM D648	108	°C
Melting temperature			150	°C
Hot deformation temperature	HDT	ASTM D648/ISO 75	108	℃（℉）
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD	Internal Method	1.4	%
Shrinkage rate	Shrinkage rate	TD	Internal Method	1.4	%
melt mass-flow rate		ASTM D1238	7.0	g/10min
melt mass-flow rate	melt mass-flow rate		ASTM D1238/ISO 1133	7	g/10min
density		ASTM D792/ISO 1183	0.9
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	89

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top