
PC DCM01-3101 NINGBO ZHETIE DAFENG
111
Form:Granules | Grade:Halogen-free flame retardant grade
Properties:
High temperature resistanEasy electroplatingFlame retardant
Typical Applications:
Automotive sectorElectronic fieldElectrical field
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Automotive sector | Electronic field | Electrical field |
| Properties: | High temperature resistan | Easy electroplating | Flame retardant |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 23℃,3.2mm | ASTM D256 | 75 | J/m |
| 23℃,4.0mm | ISO 180 | 8 | kJ/m² | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | 2mm/min | ISO 178 | 3600 | Mpa |
| bending strength | 2mm/min | ISO 178 | 110 | Mpa |
| Tensile strain | Break,50mm/min | ISO 527-1 | 3.5 | % |
| tensile strength | 50mm/min | ISO 527-1 | 82 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa | ISO 75-1 | 135 | °C |
| 0.45MPa | ISO 75-1 | 140 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| ash content | ISO 3154.1 | 9-10 | % | |
| Water absorption rate | ISO 960 | ≤0.3 | % | |
| Shrinkage rate | 2mm flow | ISO 294-4 | 0.2-0.4 | % |
| melt mass-flow rate | 300℃,1.2kg | ISO 1133 | 9 | g/10min |
| density | 23℃/H2O | ISO 1183-1 | 1.25 | g/cm³ |
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 1.6 mm | UL 94 | V-0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.