PA12

PA12 VESTAMID® 2161(粉) EVONIK GERMANY

Usages:
Protective CoatingsCoating application
Compare View Prices

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result
Tensile strain	Break	ISO 527-2	>100 %
Taber abraser	100Cycles,500g,CS-17Wheel	ASTM D-676	<1.00 mg
tensile strength	Yield	ISO 527-2	43.0 Mpa
Tensile strain	Yield	ISO 527-2	6.0 %

thermal performance	Test Condition	Test Method	Test Result
Melting temperature		ISO 3146	184 °C
Linear coefficient of thermal expansion	MD：23to55°C	ISO 11359-2	1.1E-04 cm/cm/°C
specific heat		ASTM D3354	2350 J/kg/°C
thermal conductivity		DIN 52612	0.23to0.29 W/m/K

Physical properties	Test Condition	Test Method	Test Result
Apparent density		ISO 60	>0.30 g/cm³
Water absorption rate	Saturation,100°C2	ISO 62	1.9 %
	Water absorption rate	Saturation,23°C3	ISO 62	1.3 %
		Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.50 %
		Water absorption rate	Water absorption rate	平均颗粒尺寸4	ISO 62	26 µm

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		IEC 60093	1E+14 ohms·cm
Dielectric strength		IEC 60243-1	90 KV/mm

hardness	Test Condition	Test Method	Test Result
Shore hardness	ShoreD	ISO 868	75
Ball Pressure Test		ISO 2039-1	90.0 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PA12 VESTAMID® 2161(粉) EVONIK GERMANY

Technical Data Sheet

You May Like