PP INSPIRE™ 227
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 0.900 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 3.2 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | ASTMD2457 | 32 | |
| Haze ratio | ASTMD1003 | 23 % |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Secant modulus | ASTMD882 | 1170 MPa | |
| ASTMD882 | 1140 MPa | ||
| Falling hammer impact | ASTMD1709A | 50 g | |
| Elmondov tear strength | ASTMD1922 | 14 g | |
| ASTMD1922 | 24 g | ||
| tensile strength | ASTMD882 | 27.0 MPa | |
| ASTMD882 | 41.0 MPa | ||
| ASTMD882 | 38.0 MPa | ||
| ASTMD882 | 39.0 MPa | ||
| elongation | ASTMD882 | 250 % | |
| ASTMD882 | 6.0 % | ||
| Film thickness - tested | 50 µm | ||
| ASTMD5748 | 0.500 J | ||
| ASTMD5748 | 42.0 N |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 内部方法 | 162到166 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top