POM SF15

Form：Powder | Color：true qualities | Filler：Toughening agent 15 %

Properties:

wear resistantHigh impact resistancemuteSilent toughening and reiLow friction

Typical Applications:

Bottle capEngine partsLighting fixturesGearsCar chargerCar dashboard

Supplier(0)

Product Description

Certificates(0)

Datasheet

Alternative Model(3)

Product Description

Typical Applications:	Bottle cap \| Engine parts \| Lighting fixtures \| Gears \| Car charger \| Car dashboard
Properties:	wear resistant \| High impact resistance \| mute \| Silent toughening and rei \| Low friction
Color:	true qualities
Form:	Pellets
Filler:	Toughening agent 15%

Certificates

No Data...

Technical Data Sheet

Filling analysis	Test Condition	Test Method	Test Result	Test Unit
Top out temperature			133	℃
冲击性能	Test Condition	Test Method	Test Result	Test Unit
简支梁缺口冲击强度	-30°C	ISO 179/1eA	7.5	kJ/m²
简支梁缺口冲击强度	简支梁缺口冲击强度	23°C	ISO 179/1eA	15	kJ/m²
简支梁无缺口冲击强度	-30°C	ISO 179/1eU	190	kJ/m²
简支梁无缺口冲击强度	简支梁无缺口冲击强度	23°C	ISO 179/1eU	无断裂
悬壁梁缺口冲击强度	-40°C	ISO 180/1A	6.0	kJ/m²
悬壁梁缺口冲击强度	悬壁梁缺口冲击强度	23°C	ISO 180/1A	14	kJ/m²
Mechanical Properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-1	2300	MPa
拉伸应力(屈服)		ISO 527-2/50	55.0	MPa
拉伸应变(屈服)		ISO 527-2/50	10%
Flexural elasticity		ISO 178	2200	MPa
Poisson's ratio			0.39
Injection	Test Condition	Test Method	Test Result	Test Unit
drying temperature			100	℃
干燥时间-热风干燥机			3.0到4.0	hr
Suggested maximum moisture content			<0.20%
Processing (melt) temperature			180到210	℃
Melt Temperature, Optimum			195	℃
Mold temperature			80到120	℃
Thermal Properties	Test Condition	Test Method	Test Result	Test Unit
载荷下热变形温度	0.45MPa，未退火	ISO 75-2/B	151	℃
载荷下热变形温度	载荷下热变形温度	1.8MPa，未退火	ISO 75-2/A	87.0	℃
Melting temperature		ISO 11357-3	165	℃
线形热膨胀系数	流动	ISO 11359-2	1.1E-4	cm/cm/°C
线形热膨胀系数	线形热膨胀系数	垂直	ISO 11359-2	1.1E-4	cm/cm/°C
Physical Properties	Test Condition	Test Method	Test Result	Test Unit
Solid specific gravity		ISO 1183	1.39	g/cm³
熔融体积流量(MVR)	190℃/2.16 kg	ISO 1133	7.5	cm³/10min
Mold Shrinkage		ISO 294-4	1.8%
moisture content	饱和，23℃，2.00mm	ISO 62	0.80%
moisture content	moisture content	平衡，23℃，2.00 mm，50% RH	ISO 62	0.25%
硬度	Test Condition	Test Method	Test Result	Test Unit
洛氏硬度(M计秤)		ISO 2039-2	75

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top