Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| surface tension | | | >35 mN/m |
| surface tension | | | >35 mN/m |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 60 |
| | ASTMD2240 | 60 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| gloss | | ASTMD2457 | >80 |
| gloss | | ASTMD2457 | >80 |
| Haze ratio | | ASTMD1003 | <1.0 % |
| gloss | | ASTMD2457 | >80 |
| gloss | | ASTMD2457 | >80 |
| Haze ratio | | ASTMD1003 | <1.0 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| UVResistance-A | | | Nochangeat3000hours |
| UVResistance-A | | | Nochangeat3000hours |
| UVResistance-A | | | Nochangeat3000hours |
| UVResistance-A | | | Nochangeat3000hours |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| | ASTMD1044 | <3.50 mg |
| | ASTMD1044 | <3.50 mg |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD412 | 48.3 MPa |
| elongation | Break | ASTMD412 | 450 % |
| tensile strength | | ASTMD412 | 48.3 MPa |
| elongation | Break | ASTMD412 | 450 % |
| tensile strength | | ASTMD412 | 48.3 MPa |
| elongation | Break | ASTMD412 | 450 % |
| tensile strength | | ASTMD412 | 48.3 MPa |
| elongation | Break | ASTMD412 | 450 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare