PBT+PET Sunny® PBT-PET EN230
0
- Properties:Fillerglass fiber reinforced material30%filler by weight
Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|---|---|---|
Water absorption rate | ASTM D570 | 0.080 % | |
ISO 62 | 0.080 % | ||
Shrinkage rate | ISO 294-4 | 0.30to0.60 % | |
density | ASTM D792 | 1.64 g/cm³ | |
ISO 1183 | 1.64 g/cm³ | ||
Shrinkage rate | ASTM D955 | 0.30to0.60 % |
flammability | Test Condition | Test Method | Test Result |
---|---|---|---|
UL flame retardant rating | UL 94 | HB | |
UL 94 | HB |
Mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
tensile strength | ASTM D638 | 135 MPa | |
ISO 527-2/5 | 135 MPa | ||
elongation | ASTM D638 | 1.9 % | |
Break | ISO 527-2/5 | 2.0 % | |
Flexural modulus | ASTM D790 | 8720 MPa | |
ISO 178 | 9000 MPa | ||
bending strength | ASTM D790 | 184 MPa | |
ISO 178 | 190 MPa |
Impact resistance | Test Condition | Test Method | Test Result |
---|---|---|---|
Impact strength of cantilever beam gap | ASTM D256 | 96 J/m | |
ISO 180/1A | 9.0 kJ/m² |
Thermal performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Heat distortion temperature | ASTMD648 | 210 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top