LDPE M300 SINOPEC MAOMING
172
- Properties:High transparencyoptical performancehigh densityPolymer type: homopolymerProcessing type: injectio
- Usages:filmInjection molded parts
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| cleanliness | 6-10 分/千克 | ||
| ash content | ≤0.03 % | ||
| isotactic index | ≥96.0 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 3.0±0.8 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ≥17.0 J/m | ||
| Rockwell hardness | 90 R | ||
| tensile strength | ≥30.0 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ≥150 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top