EVA UL00218 Lianhong Group

0
  • Properties:
    Without adding opening agents and smoothing agents
    with antioxidants
    the recommended processing temperature range is 100 ℃ -190 ℃
    the recommended processing temperature should not exceed 240 ℃
    a typical foaming temperature of 175 ℃
    a typical blowing temperature of 170 ℃
    and the specific process design should be adjusted according to the equipment and product
  • Usages:
    Suitable for foaming
    injection molding
    and extrusion products

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityExxonMobil 方法0.941 g/cm3
melt mass-flow rateASTM D12382.5 g/10min
Vinyl acetate contentExxonMobil 方法18 wt%
Mechanical propertiesTest ConditionTest MethodTest Result
Nominal fracture strainGB/T 1040.2-2006800 %
Shore hardnessGB/T 2411-200888
Tensile stressGB/T 1040.2-200616 MPa
Thermal performanceTest ConditionTest MethodTest Result
melting temperatureASTM D341886
vicatASTM D3152562
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top