PP Bamtac BPP235A
0
- Properties:FillerBambooFiber
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.01到1.05 g/cm³ | |
| melt mass-flow rate | ISO1133 | 8.0到12 g/10min | |
| Contractility | 0.90到1.2 % | ||
| density | ISO1183 | 1.01到1.05 g/cm³ | |
| melt mass-flow rate | ISO1133 | 8.0到12 g/10min | |
| Contractility | 0.90到1.2 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 55到60 | |||
| 55到60 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Bending stress | ISO178 | >15.0 MPa | |
| Tensile modulus | ISO527-2 | >900 MPa | |
| Tensile stress | ISO527-2 | >12.0 MPa | |
| Tensile strain | Break | ISO527-2 | >15 % |
| Flexural modulus | ISO178 | >700 MPa | |
| Bending stress | ISO178 | >15.0 MPa | |
| Tensile modulus | ISO527-2 | >900 MPa | |
| Tensile stress | ISO527-2 | >12.0 MPa | |
| Tensile strain | Break | ISO527-2 | >15 % |
| Flexural modulus | ISO178 | >700 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO180 | >17 kJ/m² | |
| ISO180 | >17 kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top