
TPV 8211-55 CELANESE USA
168
Form:Granules | Grade:Weather resistant grade
Properties:
dimensional stability Low friction coefficientRecyclable materialsCleanableGood forming performanceGood colorabilityHigh mobilityOzone resistanceChemical resistancesoftLow water absorptionNot absorbing water
Typical Applications:
packingAutomotive sectorSoft handleSmart phoneConsumer goods sectorConsumer product application fieldpackingSoft handlePhoneApplication in the automotive field
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | packing | Automotive sector | Soft handle | Smart phone | Consumer goods sector | Consumer product application field | packing | Soft handle | Phone | Application in the automotive field |
| Properties: | dimensional stability | Low friction coefficient | Recyclable materials | Cleanable | Good forming performance | Good colorability | High mobility | Ozone resistance | Chemical resistance | soft | Low water absorption | Not absorbing water |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | HB | |
| 1.1mm | UL 94 | HB | ||
| elastomer | Test Condition | Test Method | Test Result | Test Unit |
| Permanent compression deformation | 125°C,70hr4 | ISO 815 | 49 | % |
| 70°C,22hr4 | ISO 815 | 19 | % | |
| 125°C,70hr3 | ASTM D395B | 49 | % | |
| 70°C,22hr3 | ASTM D395B | 19 | % | |
| elongation | Break,23°C,Across Flow | ASTMD412 | 480 | % |
| tensile strength | Break,23°C,横向Flow | ASTMD412 | 4.60 | Mpa |
| Tensile stress | 100%Strain,23°C,横向Flow | ASTMD412 | 2.10 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Brittle temperature | ASTMD746 | -62.0 | °C | |
| RTI | 3.0mm | UL 746 | 95.0 | °C |
| 1.1mm | UL 746 | 90.0 | °C | |
| RTI Elec | UL 746 | 100 | °C | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreA,15Sec,23°C | ISO 868 | 59 | |
| aging | Test Condition | Test Method | Test Result | Test Unit |
| Change rate of hardness (Shore) in the air | ShoreA,150°C,168hr | ASTMD573 | 1.0 | |
| Change rate of ultimate elongation in air | 150°C,168hr | ASTMD573 | -10 | % |
| Change rate of tensile strength in air | 150°C,168hr | ASTMD573 | -11 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.