Technical Data Sheet
Basic performance | Test Condition | Test Method | Test Result |
---|---|---|---|
density | ASTM D-792 | 0.998 g/cm | |
melt mass-flow rate | ASTM D-1238 | 20 g/10min | |
Shrinkage rate | ASTM D-955 | 0.40-0.60 % | |
Combined with styrene content | % | Internal Method 17.4-20.5 |
Mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
tear strength | ASTM D-624 | 19 kN/m | |
hardness | ASTM D-2240 | 44 | |
Tensile stress | ASTM D-412 | 2.41 Mpa | |
tensile strength | ASTM D-412 | 5.52 Mpa | |
ASTM D-412 | 550 % | ||
hardness | ISO 868 | 48 Shore A | |
Tensile stress | ISO 37 | 1.90 MPa | |
elongation | ISO 37 | 1300 % |
Other performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Apparent viscosity | ASTM D-3895 | 1.00 Pa·s |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top