Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.63 g/cm³ |
| Shrinkage rate | | ISO 294-4 | 0.30 % |
| Shrinkage rate | | ISO 294-4 | 0.30 % |
| Water absorption rate | | ISO 62 | 0.90 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Flammability level | | IEC 60695-11-10, -20 | V-0 |
| Flammability level | | IEC 60695-11-10, -20 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 12500 Mpa |
| Tensile stress | | ISO 527-2 | 55.0 Mpa |
| Tensile strain | | ISO 527-2 | 0.60 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179/1eA | 2.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC 60093 | 1.0E+15 ohms·cm |
| dielectric strength | | IEC 60243-1 | 30 KV/mm |
| CTI | | IEC 60112 | 600 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO 11359-2 | 2.5E-5 cm/cm/°C |
| | ISO 11359-2 | 2.5E-5 cm/cm/°C |
| thermal conductivity | | ASTM E1461 | 1.0 W/m/K |
| thermal conductivity | | ASTM E1461 | 8.0 W/m/K |
| RTI Elec | | UL 746 | 140 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare