PP INNOPOL® PP CS 1-5140 LH
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.22 g/cm³ | |
| Melt volume flow rate | ISO1133 | 15.0 cm³/10min | |
| Ash Content | ISO3451-1 | 37 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | FMVSS302 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | Yield | ISO527-2/50 | 31.0 MPa |
| Tensile strain | Yield | ISO527-2/50 | 3.6 % |
| Nominal tensile fracture strain | ISO527-2 | 7.0 % | |
| Flexural modulus | ISO178 | 4100 MPa | |
| Tensile modulus | ISO527-2/1 | 4000 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179/1eA | 1.6 kJ/m² | |
| ISO179/1eA | 3.5 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO179/1eU | 13 kJ/m² | |
| ISO179/1eU | 30 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/B | 133 °C | ||
| ISO75-2/A | 79.0 °C | ||
| vicat | ISO306/A120 | 156 °C | |
| ISO306/B120 | 93.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top