Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.17 g/cm³ |
| density | | ISO1183 | 1.17 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 30 g/10min |
| melt mass-flow rate | | ISO1133 | 30 g/10min |
| Shrinkage rate | | | 0.40to0.70 % |
| Shrinkage rate | | ISO2577 | 0.40to0.70 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| elongation | Break | ASTMD638 | >30 % |
| Tensile strain | Break | ISO527-2 | >30 % |
| Flexural modulus | | ASTMD790 | 2500 MPa |
| Flexural modulus | | ISO178 | 2500 MPa |
| bending strength | | ASTMD790 | 90.0 MPa |
| Bending stress | | ISO178 | 90.0 MPa |
| Tensile modulus | | ASTMD638 | 2700 MPa |
| Tensile modulus | | ISO527-2 | 2700 MPa |
| tensile strength | Yield | ASTMD638 | 60.0 MPa |
| Tensile stress | Yield | ISO527-2 | 60.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 700 J/m |
| Impact strength of cantilever beam gap | | ISO180 | 50 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | 1E+15 ohms |
| dielectric strength | | IEC60250 | 30 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/A | 85.0 °C |
| | ASTMD648 | 95.0 °C |
| | ISO75-2/B | 95.0 °C |
| | ASTMD648 | 85.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare