PA6 Ravamid® BGF50 BK Entec Polymers

Properties:

Filler glass fiber reinforced material 50% filler by weight

Typical Applications:

General

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	General
Properties:	Filler \| glass fiber reinforced material \| 50% \| filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ASTM D256	10.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	10	kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179/1eA	9.0	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	55	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Burning rate	3.20mm	FMVSS302	<100	mm/min
UL flame retardant rating	1.6mm	UL 94	HB
UL flame retardant rating	UL flame retardant rating	3.2mm	UL 94	HB
Burning wire flammability index	2.0mm	IEC 60695-2-12	650	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ASTMD790	8500	MPa
elongation	Break	ASTMD638	3.0	%
tensile strength	Break	ASTMD638	180	MPa
Tensile modulus		ASTMD882	9100	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ASTMD648	205	°C
Vicat softening temperature		ISO 306/B50	215	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTMD792	1.56	g/cm³
Humidity		ISO 960	<0.10	%
Shrinkage rate	MD	ASTM D955	0.15to0.85	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top