ABS

ABS Prime ABS 860 FR Primex Plastics Corporation

Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	23°C	ASTM D256	200 J/m

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	2.5mm	UL 94	5VB
UL flame retardant rating	UL flame retardant rating	1.5mm	UL 94	V-0

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Yield	ASTM D638	41.2 MPa
Bending modulus		ASTM D790	2060 MPa
bending strength		ASTM D790	54.9 MPa

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	0.45MPa,Annealed	ASTM D648	82.8 °C
Vicat softening temperature		ASTM D1525	92.8 °C

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	220°C/10.0kg	ASTM D1238	12 g/10min
density		ASTM D792	1.18 g/cm³

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	R-Scale	ASTM D785	98

Supplementary Information	Test Condition	Test Method	Test Result
Temperature	FormingTemperature		149to177 °C
Temperature	Temperature	MoldTemperature		66to88 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top