Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.51 g/cm³ |
| Water absorption rate | | ASTMD570 | 0.16 % |
| Water absorption rate | Saturation | ASTMD570 | 0.90 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | M-Scale | ASTMD785 | 114 |
| Rockwell hardness | R-Scale | ASTMD785 | 127 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 5520 MPa |
| tensile strength | Yield | ASTMD638 | 117 MPa |
| elongation | Break | ASTMD638 | 13 % |
| Flexural modulus | | ASTMD790 | 5860 MPa |
| bending strength | | ASTMD790 | 186 MPa |
| compressive strength | | ASTMD695 | 212 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 85 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTMD149 | 30 kV/mm |
| dielectric constant | | ASTMD150 | 3.70 |
| dielectric constant | | ASTMD150 | 3.70 |
| Dissipation Factor | | ASTMD150 | 1.5E-03 |
| Volume resistivity | | ASTMD257 | >1.0E+16 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 210 °C |
| Continuous use temperature | | UL746 | 171 °C |
| vicat | | ASTMD3418 | 228 °C |
| | ASTMD696 | 2E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare